Chapter 4 Advanced Settings40 Copyright 2006 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.Performing a Cold BootA cold boot cuts off power of your device, erasing all records and entries, deleting allprograms you have added, and restoring the device to default factory settings.Never perform a hard reset unless a soft reset does not correct your problem. Whenyou perform your next ActiveSync operation, you can restore any data that you previ-ously synchronized to your computer or you can restore data that you backed up to astorage card.NOTE: When you perform a hard reset, the date and time settings are not beretained. Formats, preferences, and other setting are restored to theirdefault factory settings. Data stored in the flash storage are retained.Follow these instructions to perform a cold boot.1. Press and hold the Func key and TABkey.2. While holding the Func key and TABkey, insert the tip of the stylus into thereset hold on the back of the PA600.Press and hold the reset button until yousee the unitech splash logo screen.Wait 5 seconds and then release theFunc key and TAB keys.NOTE: The system is returned to the default settings. All registry settings and allfiles (include the hidden files) are returned to their original factorydefaults.