Unitron uTV 2 User Manual

Also see for uTV 2: Guide Guide Quick setup guide

Contents

2120(a)Fig. 7If uDirect 2 is not used for other purposes suchas phone calls, switch it off by sliding the powerswitch to the OFF position as shown in fig. 8.The uDirect 2 power indicator will blink red first,then solid for 2 seconds to indicate completeshut-down.If no audio input is available, the uTV 2automatically stops the Bluetooth audiotransmission to uDirect 2 after 5 minutes. Itsstatus light will blink green.Refer to the uDirect 2 user guide for pairinginstructions of uDirect 2 with the mobile phoneor other entertainment and communicationdevices such as radios or personal computers.Step 9: Switching off uTV 2 and uDirect 2To switch off the devices:To end the transmission of the TV audio signal,switch off the uTV 2 by pressing the ON/OFFbutton (a) as shown in fig. 7. Fig. 8 OFF