Unitron uTV 2 User Manual

Also see for uTV 2: Guide Guide Quick setup guide

Contents

1312Step 4: Pairing uDirect 2 and the uTV 2Before starting to use the uTV 2 and uDirect 2,they need to be paired. The pairing procedurecontrols which Bluetooth® devices are permittedto communicate with each other.Make sure both devices are switched on asdescribed in step 3.You do not need to insert uDirect 2 intothe uTV 2 charging slot (f) during pairing.Pairing needs to be completed only once foreach device you wish to use with your uDirect2.1. Press and hold the uDirect 2 andbutton simultaneously for 2 seconds untilthe audio indicator starts to rapidly blinkblue (fig. 3). Your uDirect 2 will remain in thepairing mode for two minutes or until thepairing is completed. poweraudioauauauauauauauauauauaudididididididididididioooooooooauuudidididididididididididddddddpoweraudioauauauauauauauauauuaudididididididididididioooooooooouuuuudidididididididididididdddPress and for 2 secFig. 32. If the uTV 2 status light (g) is not rapidlyblinking blue already, press the ON/OFFbutton (a) for 5 seconds until the Bluetoothindicator (g) is rapidly blinking blue as shownin fig 4.3. Wait until both Bluetooth indicator lights, (g)turn solid blue. This can take up to 2 minutesbut typically is done within a few seconds.Fig. 4