VADDIO ONELINK Installation And User Manual
Also see for OneLINK: Installation and user guide
                    | |
Contents
| 
OneLINK For RoboSHOT HDMI CamerasOneLINK For RoboSHOT HDMI Cameras Page 3 of 20O VERVIEW :Vaddio’s OneLINK System is a digital cameraextension system that extends HDMI video, powernetwork and control on a single Cat-5e/6 cable atdistances of up to 328’ (100m). The OneLINKsystem sends and regulates power to the camera,provides a bi-directional control channel for Ethernetand transmits/receives uncompressed HDMI digitalvideo up to 1080p/60.The system consists of the small OneLINK EZIM (EZCamera™ Interface Module) camera interface at the cameralocation and the OneLINK HDMI Interface. The EZIM provides the required camera connectivity and is mounted tothe underside of the RoboSHOT HDMI camera’s Thin Profile Wall Mount with two 6-32 x .188” black mountingscrews. All the 12” (305mm) patch cables on the camera end are provided with the OneLINK system including anHDMI cable, a power cable and two Cat-5e patch cables for network and RS-232. The Thin Profile Wall Mount canbe mounted directly to a 2-gang sized electrical box for conduit or directly to the dry wall with wall anchors.From one end to the other, the OneLINK system provides system integrators and end users a simplified productbased on the vast experience Vaddio has in cameras and cable extension systems.Please use this manual in conjunction with the manual for the camera attached to the OneLINK System.Intended UseBefore operating the device, please read the entire manual thoroughly. The system was designed, built andtested for use indoors, and with the provided power supply and cabling. The use of a power supply other than theone provided or outdoor operation has not been tested and could damage the device and/or create a potentiallyunsafe operating condition.Save These InstructionsThe information contained in this manual will help you install and operate your product. If these instructions aremisplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent productdrawings for the Vaddio product line on the Vaddio website. These documents can be downloaded fromwww.vaddio.com free of charge.Important SafeguardsRead and understand all instructions before using. Do not operate any device if it has been dropped or damaged.In this case, a Vaddio technician must examine the product before operating. To reduce the risk of electric shock,do not immerse in water or other liquids and avoid extremely humid conditions.Important NoteOneLINK systems are not compatible with previous versions of OneLINK codec camera extenders. Thespecifications are different and will not function if parts from either system are mixed. The older systems are thosewith Quick-Connect part number 998-1105-019 and EZIM part number 998-6700-003. Connecting these to a newOneLINK system may cause failure and void warranty.Images: OneLINK HDMI Interface(above) and the OneLINK EZIMCamera Interface (right),Use only the power supply provided with the system. Use of any unauthorized power supply willvoid any and all warranties.Please do not use “pass-thru” type RJ-45 connectors. These pass-thru type connectors do notwork well for professional installations and can be the cause of intermittent connections. Forbest results please use standard RJ-45 connectors, real crimpers and test all cables for properpin-outs prior to use and connection to Vaddio Cat-5e/6 products. |
Related manuals for VADDIO OneLINK
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine