VALMETAL H Series Operator's Manual And Parts Book
                                                                                      | |
Contents
| 
2.6 STORAGE SAFETY1. Store the Grinder in an area away from humanactivity.2. Do not permit children to play on or around thestored machine.3. Make sure the unit is sitting, or blocked up firmand solid and will not tip or sink into a soft area.4. Cover with a weather-proof tarpaulin and tiedown securely.2.7 TIRE SAFETY1. Failure to follow proper procedures when mount-ing a tire on a wheel or rim can produce anexplosion which may result in serious injury ordeath.2. Do not attempt to mount a tire unless you havethe proper equipment and experience to do thejob.3. Have a qualified tire dealer or repair service per-form required tire maintenance.2.8 SAFETY DECALS1. Keep safety decals and signs clean and legibleat all times.2. Replace safety decals and signs that are missingor have become illegible.3. Replaced parts that displayed a safety signshould also display the current sign.4. Safety decals or signs are available from yourDealer Parts Department or the factory.How to install Safety DecaIs :* Be sure that the installation area is cleanand dry.* Decide on the exact position before youremove the backing paper.* Remove the smallest portion of the splitbacking paper.* Align the decal over the specified area andcarefully press the small portion with theexposed sticky backing in place.* Slowly peel back the remaining paper andcarefully smooth the remaining portion ofthe decal in place.* Small air pockets can be pierced with a pinand smoothed out using the piece of decalbacking paper.SAFETY7 |
manualsdatabase
Your AI-powered manual search engine