Vacon 10 Complete User's Manual
Also see for 10: Quick guideUser instructionQuick guideQuick guideQuick guide
                                                                          | |
Contents
| 
control panel vacon • 2824-hour support +358 (0)40 837 1150 • Email: vacon@vacon.com77. CONTROL PANEL7.1 GeneralThe Vacon 10 API Full and API Limited versions have similar control panels. Thepanel is integrated to the drive consisting of corresponding application card and anoverlay on the drive cover with status display and button clarifications.The Control panel consists of an LCD display with backlight and a keypad includinga navigation wheel, a green START button and a red STOP button (see Figure 7.1).7.2 DisplayThe display includes 14-segment and 7-segment blocks, arrowheads and clear textunit symbols. The arrowheads, when visible, indicate some information about thedrive, which is printed in clear text on the overlay (numbers 1…14 in the figure be-low). The arrowheads are grouped in 3 groups with the following meanings and Eng-lish overlay texts (see Figure 7.1):Group 1 - 5; Drive status1= Drive is ready to start (READY)2= Drive is running (RUN)3= Drive has stopped (STOP)4= Alarm condition is active (ALARM)5= Drive has stopped due to a fault (FAULT)Group 6 - 10; Control selections6= Motor is rotating forward (FWD)7= Motor is rotating reverse (REV)8= I/O terminal block is the selected control place (I/O)9= Keypad is the selected control place (KEYPAD)10= Fieldbus is the selected control place (BUS)Group 11 - 14; Navigation main menu11= Reference main menu (REF)12= Monitoring main menu (MON)13= Parameter main menu (PAR)14= Fault history main menu (FLT) |
Related manuals for Vacon 10
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine