control panel vacon • 3224-hour support +358 (0)40 837 1150 • Email: vacon@vacon.com77.4.3 Monitoring menuFigure 7.4: Monitoring menu displayMonitoring values mean actual values of measured signals as well as statuses ofsome control settings. They are visible in API Full and Limited display, but they can-not be edited. The monitoring values are listed in Table 7.1.Pushing the navigation wheel once in this menu takes the user to the next level,where the monitoring value, e.g. M1.11 and value are visible (see Figure 7.2). Themonitoring values can be browsed by rolling the navigation wheel clockwise, asshown in Figure 7.4.Code Monitoring signal Unit ID DescriptionM1.1 Output frequency Hz 1 Frequency to the motorM1.2 Frequency reference Hz 25M1.3 Motor shaft speed rpm 2 Calculated motor speedM1.4 Motor current A 3 Measured motor currentM1.5 Motor torque % 4 Calculated actual/nominaltorque of the motorM1.6 Motor power % 5 Calculated actual/nominalpower of the motorTable 7.1: Vacon 10 monitoring signalsHzFAULTALARMSTOPREADY RUNREFMONPARFLTFWD REV I/O KEYPAD BUSAlternatesin the displayBrowseM1.1 - M1.20
