Vacon NXL Series User Manual

Also see for NXL series: User manual User manual

Contents

Vacon NXL Series User Manual Manual pdf 61 page image

vacon Control keypad 61(80)Vacon Oyj Telephone: +358-201-2121 Fax: +358-201-212 20524-hour support: +358-40-8371 150 Email: vacon@vacon.com77.3.6.1 Copy parametersThe Copy parameters submenu (S6.3) is located under the System menu.The Vacon NX frequency converter features a possibility for the user to store and load twocustomised parameter sets (all parameters included in the application) and to load back the factorydefault parameter values.Parameter sets (S6.3.1)On Parameter sets page (S6.3.1), push the Menu button right to enter the Edit menu. You can storeor load two customised parameter sets or load back the factory defaults. Confirm with the Enterbutton. Wait, until 8 (=OK) appears on the display.Figure 7-10. Storing and loading of parameter sets7.3.6.2 SecurityThe Security submenu (S6.5) under the system menu has a function that allows the user to prohibitchanges to the parameters.Parameter lock (P6.5.2)If the parameter lock is activated the parameter values cannot be edited.NOTE: This function does not prevent unauthorised editing of parameter values.Enter the edit mode by pushing the Menu button right. Use the Browser buttons to change theparameter lock status (0 = changes enabled, 1 = changes disabled). Accept the change with theEnter button or return to the previous level with the Menu button left.enterSTOP I/O termREADYSTOP I/O termREADYnxlk21.fh8STOP I/O termREADYSTOP I/O termREADY