Vacon NXL Series User Manual

Also see for NXL series: User manual User manual

Contents

Vacon NXL Series User Manual Manual pdf 67 page image

vacon Control keypad 67(80)Vacon Oyj Telephone: +358-201-2121 Fax: +358-201-212 20524-hour support: +358-40-8371 150 Email: vacon@vacon.com7Connected options submenu (S6.8.6)The Connected options submenu (S6.8.6) shows the following information on the option boardconnected to the frequency converter:Page ContentE6.8.6.1 Option boardE6.8.6.1.1 Option board statusE6.8.6.1.2 Program versionTable 7-11. Connected options submenuIn this submenu you find information about the option board connected to the control board (see chapter 6.2)You can check the status of the slot by entering the board submenu with the Menu button right and using theBrowser buttons. Push the Menu button right again to display the status of the board. The keypad will alsodisplay the program version of the respective board when you push either one of the Browser buttons.For more information on the expander board-related parameters, see Chapter 7.3.7.Figure 7-16. Expander board information menu7.3.6.6 AI modeThe parameter P6.9.2 selects the analogue input modeNote! Make sure that the jumper selections correspond to the selections of this parameter. See Figure 6-16.7.3.6.7 Fieldbus parametersThe parameters of Modbus protocol are only shortly described here. For further information, pleaserefer to Vacon NX Modbus Option Board User’s Manual. Please visithttp://www.vacon.com/support/nxdocuments.html.Expander board communication status (I6.10.1)With this function you can check the status of the RS 485 termination resistor0 = Not connected1 = ConnectedSTOP I/O termREADYSTOP I/O termREADYnxlk27.f h8