Vacon NX_ 0003 5 User Manual
                                                                                                                  | |
Contents
| 
102 • vacon CONTROL KEYPAD7Example:x Transfer delay between the AC drive and the PC = 600 msx The value of par. 6.7.3 is set to 1200 ms (2 x 600, sending delay + receiving delay)x The corresponding setting shall be entered in the >Misc@-part of the file NCDrive.ini:Retries = 5AckTimeOut = 1200TimeOut = 6000It must also be considered that intervals shorter than the AckTimeOut-time cannot be used in NC-Drivemonitoring.Enter the edit mode by pushing theMenu button right. Use theBrowser buttons to change theacknowledgement time. Accept the change with theEnter button or return to the previous level with theMenu button left.Figure 7-23. HMI acknowledge timeoutNumber of retries to receive HMI acknowledgement (P6.7.4)With this parameter you can set the number of times the drive will try receive acknowledgement if thisdoes not succeed within the acknowledgement time (P6.7.3) or if the received acknowledgement is faulty.Enter the edit mode by pushing theMenu button right. The present value shown starts to blink. Use theBrowser buttons to change the amount of retries. Accept the change with theEnter button or return to theprevious level with theMenu button left.See Figure 7-23 for the procedure of changing the value.7.3.6.8 System infoIn theSystem info submenu (S6.8) you can find AC drive-related hardware and software information aswell as operation-related information.Total counters (S6.8.1)In theTotal counters page (S6.8.1) you can find information related to the AC drive operation times, i.e. thetotal numbers of MWh, operation days and operation hours passed so far. Unlike the counters in the Tripcounters , these counters cannot be reset.Note! The Power On time counter (days and hours) runs always, when the power is on.Page Counter ExampleC6.8.1.1. MWh counterC6.8.1.2. Power On day counter Value on display is1.013. The drive has operatedfor 1 year and 13 days.C6.8.1.3. Power On hour counter Value on display is 7:05:16. The drive hasoperated for 7 hours 5 minutes and 16 seconds.Table 7-7. Counter pagesREADYI/O term200msREADYI/O termenter200msHMI ACK timeout HMI ACK timeoutPhone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com |
Related manuals for Vacon NXP 0650 6
This manual is suitable for:
NXP 0650 6NXP 0750 6NXP 0820 5NXP 0820 6NXP 0920 5NXP 1030 5NX_ 0003 5NX_ 0004 2NX_ 0004 5NX_ 0004 6NX_ 0005 5NX_ 0005 6NX_ 0007 2NX_ 0007 5NX_ 0007 6NX_ 0008 2NX_ 0009 5NX_ 0010 6NX_ 0011 2NX_ 0012 2NX_ 0012 5NX_ 0013 6NX_ 0016 5NX_ 0017 2NX_ 0018 6NX_ 0022 5NX_ 0022 6NX_ 0025 2NX_ 0027 6NX_ 0031 2NX_ 0031 5NX_ 0034 6NX_ 0038 5NX_ 0041 6NX_ 0045 5NX_ 0048 2NX_ 0052 6NX_ 0061 2NX_ 0061 5NX_ 0062 6NX_ 0072 5NX_ 0075 2NX_ 0080 6NX_ 0087 5NX_ 0088 2NX_ 0100 6NX_ 0105 5NX_ 0114 2NX_ 0125 6NX_ 0140 2NX_ 0140 5NX_ 0144 6NX_ 0168 5NX_ 0170 2NX_ 0170 6NX_ 0205 2NX_ 0205 5NX_ 0208 6NX_ 0261 2NX_ 0261 5NX_ 0261 6NX_ 0300 2NX_ 0300 5NX_ 0325 6NX_ 0385 5NX_ 0385 6NX_ 0416 6NX_ 0460 5NX_ 0460 6NX_ 0502 6NX_ 0520 5NX_ 0590 5NX_ 0590 6NX_ 0650 5NX_ 0730 5
manualsdatabase
Your AI-powered manual search engine