Split Type Installation Manual 3EN1 Your Safety1.1 Symbols usedDanger!Immediate danger to life and limb.Danger!Danger of electric shock.Warning!Potentially dangerous situation for the productand the environment.Note!Useful information and indications.1.2 Proper Use of the UnitThis unit has been designed and manufactured for thesole purpose of comfort cooling and heating occupiedresidential and commercial premises.. The use thereoffor other domestic or industrial purposes shall be theexclusive responsibility of the persons specifying,installing or using them in that way.Prior to handling, installing, start up, using orperforming maintenance on the unit, the personsassigned to perform these tasks should be familiar withall the instructions and recommendations set forth inthe unit's installation manual.Note!Keep the manuals throughout the service life ofthe unit.Note!The information relating to this unit is dividedbetween two manuals: installation manual anduser manual.Note!This equipment contains R-410A refrigerant. Donot vent R-410A into atmosphere: R-410A, is afluorinated greenhouse gas, covered by KyotoProtocol, with a Global Warming Potential (GWP)= 1975.Note!The refrigerant fluid contained in thisequipment must be properly recovered forrecycling, reclamation or destruction beforethe final disposal of the equipment.Note!The relevant personnel performing any service ormaintenance operations involving the handling ofthe refrigerant fluid must have the necessarycertification to comply with all local andinternational regulations.2 Extreme Operating ConditionsThis unit has been designed to operate within the rangeof temperatures indicated on Figure 2.1. Ensure thatthese ranges are not exceeded.C ALEFACCIÓNFig. 2.1 Operating ranges of the unit.LegendD.B. Temperature measured by dry bulb3 Identification of the UnitThis manual is valid for the Split system series. In orderto know the specific model of your unit please refer tothe unit nameplates.The nameplates are located on the outdoor and indoorunits.Your Safety 1Extreme Operating Conditions 2Identification of the Unit 3IndoorOutdoor 43ºC D.B.COOLING HEATING43ºC D.B.8ºC D.B.16ºC D.B. 16ºC D.B.32ºC D.B.32ºC D.B.-7ºC D.B.32ºC D.B.