Vaillant ecoTEC plus Operating Instructions Manual

Also see for ecoTEC plus SERIES: Instructions for use Instructions for use Instructions for installation and servicing Instructions for use Instructions for installation and servicing

Vaillant ecoTEC plus Operating Instructions Manual Manual pdf 27 page image

Operating instructions ecoTEC plus 0020124810_FT1b 2710 Technical data10 Technical dataecoTEC plus Unit VU GB126/5-5VU GB156/5-5VU GB186/5-5VU GB246/5-5VU GB306/5-5VU GB376/5-5Nominal heat output range P at 40/30 °C kW 3.3 - 13.1 3.3 - 16.4 4.1 - 19.7 5.7 - 26.2 6.4 - 32.8 7.0 - 40.4Nominal heat output range P at 50/30 °C kW 3.2 - 12.9 3.2 - 16.1 4.1 - 19.3 5.6 - 25.7 6.2 - 32.1 6.9 - 39.6Nominal heat output range P at 60/40 °C kW 3.1 - 12.5 3.1 - 15.7 3.9 - 18.8 5.5 - 24.9 6.1 - 31.2 6.7 - 38.5Nominal heat output range P at 80/60 °C kW 3.0 - 12.0 3.0 - 15.0 3.8 - 18.0 5.2 - 24.0 5.8 - 30.0 6.4 - 37.0Hot water output kW 12.0 15.0 18.0 24.0 30.0 37.0Maximum thermal load for heating drinking water kW 12.4 15.5 18.6 24.7 30.9 38.1Maximum thermal load on heating-side kW 12.4 15.5 18.6 24.7 30.9 38.1Minimum thermal load kW 3.1 3.1 3.9 5.4 6.0 6.6Heating output setting range kW 3 - 12 3 - 15 4 - 18 5 - 24 6 - 30 6 - 37Heatingmax. flow temperature °C 85Setting range max. flow temperature(factory setting: 75 °C) °C 30 - 80permissible total over-pressure bar 3.0Circulation water volume (with reference to T = 20 K) l/min 516 645 774 1032 1290 1591Condensate volume approx. (pH value 3.5- 4.0)in heating mode 50 °C supply/30 °C return l/h 1.2 1.6 1.9 2.5 3.1 3.8Residual feed head pump(at nominal circulation water volume) mbar 250 200Electrical power consumption at 30% part load W 40 40 45 50 50 50Hot water handling (only VUW)Least water volume l/min 1.5Water volume (at T = 35 K) l/min 4.9 6.1 7.4 9.8 12.3 15.2Water volume (at T = 30 K) l/min 5.7 7.2 8.6 11.5 14.3 17.7Permitted overpressure bar 10.0Required connection pressure bar 0.35Hot water discharge temperature range °C 35 - 65GeneralUnit gas connection Inches G 1/2Unit heating connection Inches G 3/4Unit cold and hot water connection Inches G 3/4Exhaust gas connecting pieces mm 60/100 (concentric), optional 80/125 (concentric)Gas connection pressure (gas flow pressure)natural gas, G20 mbar 20Gas connection pressure (gas flow pressure)propane, G31 mbar 37Connection value at 15 °C and 1013 mbar(based on hot water production if necessary) G20G31m 3/hkg/h1.30.961.61.22.01.442.61.923.32.44.02.96Exhaust gas mass flow min./max. g/s 1.4/5.6 1.4/7.0 1.8/8.4 2.4/11.1 2.7/13.9 3.0/17.1Flue gas temperature min./max. °C 40/70Exhaust gas connection approval C13. C33, C43, C53, C63, C83, C93, B53Standard utilisation rate based on nominal heat output(in accordance with DIN 4702, Part 8) based on Hi(heating value)at 75/60 °Cat 40/30 °C%%107109Standard utilisation rate based on nominal heat output(in accordance with DIN 4702, Part 8) based on Hs(calorific value)at 75/60 °Cat 40/30 °C%%96.498.230% efficiency % 108NOx class 5Unit dimensions (H x W x D) mm 720 x 440 x 335 720 x 440x 369720 x 440x 403Installation weight approx. kg 35 35 35 37 39 41Tab. 16.1 Technical data ecoTEC plus VU(continued on next page)