Self-help, vehicle care 181Bulb replacementBefore replacing a bulb, switch off ignitionand relevant switch.Only hold new bulbs at base! Do not touchthe bulb glass with bare hands, otherwisefingerprints on the g lass evaporate andresidue builds up on the reflectoreventually resulting in a dull reflector.Inadvertently stained bulbs ma y becleaned with a clean lint-free c loth, usingalcohol or w hite spirit.Replacement bulb must be in accordancewith data on base of d efec tiv e bulb. Do notexc eed wattage given on bulb base.Hea dlight aimingWe rec om mend that headlight aiming b ecarried out by a workshop, which will hav especial equipment.When aiming your hea dlights, the manualheadlight range a djustment 3 must be setto 7.Picture no: s0014624.tifHead l ight remov alFor bulb replacement, it is necessary to firstremove the hea dlight assem bly.1. Switch off ignition a nd headlight switch.2. Open the bonnet, release the 11retainers and remove the radiator cover.3. Remov e 3 bolts and withdraw headlight.4. Depress harness connector tags anddisconnect headlight wiring.5. Remov e the headlight assembly .Headlight assembly installation is thereverse of removal - ensure locating dowelaligns with its socket.Do not overtig hten bolts or retainers.No. C ircuit Rati ng22 Electric seat 30 A23 Battery 60 A24 Defogg er 30 A25 Dipped beam (left side) 15 A26 Dipped beam (right side) 15 A27 Parking light (left side) 10 A28 Front fog lights 15 A29 Main b eam 15 A30 Rear wiper 20 A31 - -32 Headlight wash 20 A33 Transm ission controlmodule15 A34 Trailer / pa rk ing light(left side)10 A35 Sp are 25 A36 Sp are 20 A37 Sp are 15 A38 Sp are 10 A