202 Vehicle care3. Connect the black lead to thenegative terminal of the boosterbattery.4. Connect the other end of the blacklead to a vehicle grounding point,such as the engine block or anengine mounting bolt. Connect asfar away from the dischargedvehicle battery as possible,however at least 60 cm.Route the leads so that they cannotcatch on rotating parts in the enginecompartment.To start the engine:1. Start the engine of the vehicleproviding the jump.2. After five minutes, start the otherengine. Start attempts should bemade for no longer than15 seconds at an interval ofone minute.3. Allow both engines to idle forapprox. three minutes with theleads connected.4. Switch on electrical consumers(e.g. headlights, heated rearwindow) of the vehicle receivingthe jump start.5. Reverse above sequence exactlywhen removing leads.TowingTowing the vehicleThe towing eye is stowed with thevehicle tools 3 182.Adam1. Disengage the cap by pushing atthe marked position.
