60 StorageIf the backrest is split, unlock therelevant side, and unlock at bothsides if it is a single unit.Folding down rear backrestsRemove load compartment cover asnecessary.Push head restraints down bypressing the catch.Guide the seat belts through beltmounts to protect them againstdamage. When folding the backrests,pull the seat belts along with them.Disengage the backrest (single orsplit) using the release lever and foldit down onto the seat cushion.If the backrest is split, unlock therelevant side, and unlock at bothsides if it is a single unit.If the vehicle is to be loaded via a reardoor, take the seat belt out of the beltmount on the backrest, roll it up andinsert the latch plate into the sideshade retainer.Move rear seat backrests upright andallow locking mechanisms to engageaudibly at both sides. Once thebackrests are locked the red markmust no longer protrude.The rear seat backrests can belocked in two positions, vertical andraked.Do not trap the seat belt when movingthe backrest to the upright position.Install the load compartment cover.Load compartment coverDo not place any objects on the cover.
