Lighting 95Vehicles with adaptive forwardlightingAdapting the aim of the headlightbeam:1. Pull turn signal lever and hold untilcontrol indicator f starts flashing.2. Switch on ignition.3. An acoustic signal sounds afterapprox. 3 seconds.Control indicator f 3 80.Every time the ignition is switched on,f flashes for approx. 4 seconds.For deactivation operate the sameprocedure as described above. f willnot flash when the function isdeactivated.Daytime running lightsWith the ignition on and the lightswitch set to 7 or A, the side lights areswitched on. When the engine isrunning, headlights illuminate.On vehicles without automatic lightcontrol, 9 must be switched on whenit gets dark for illumination of theinstrument panel.The daytime running lights switch offwhen the ignition is switched off.Adaptive forward lightingAdaptive forward lighting ensuresbetter illumination of bends, crossingsand narrow bends.Curve lighting (1)The light beam pivots based onsteering wheel position and speed.Corner lighting (2)On tight bends or when turning off,depending on the steering angle orthe turn signal, an additional left orright reflector is switched on whichilluminates the road in the direction oftravel. It is activated up to a speed of40 km/h (25 mph).Reversing functionIf the lights are on, reverse gear isengaged, and the turn signal isactivated, the cornering light on theappropriate side is switched on. Thecornering light stays on for 15seconds once the turn signal hasbeen switched off.Control indicator B 3 80.
