62 StorageTo remove the three other segments(order 2 to 4) lift at the rear,disengage, twist and remove.Install the segments in the order 4 to1. Engage segments in recesses atthe side.The segments overlap at theconnecting points when they areclosed.Rear floor storage coverThe double load-bay floor can beinserted in the load compartment intwo positions:■ directly beneath the cover for thespare wheel recess or the floorcover,■ or in the upper openings in the loadcompartment.To remove, lift the load-bay floorusing the lever and pull backwards.To insert, push the load-bay floorforwards in the corresponding guide,then lower.If mounted in the upper position, thespace between the load-bay floor andthe spare wheel well cover can beused as a stowage compartment.In this position, if the rear seatbackrests are folded forwards, analmost completely flat load bay iscreated.The double load-bay floor is able towithstand a load of no more than 100kg.In models with a tyre repair kit, thespare wheel recess may be used asan additional stowage compartment.
