VaporTEK Calibration Auto-Calibration using FB1 Terminal464. When the display below appears, press the keys shown:5. When the display below appears, if necessary to change the pulse rate, press the keys shown:6. Enter Pulse Rate 136 for Encore 500S/500/300 dispensers.Auto-Calibration using FB1 Terminal1. Press the Start button until below screen appears. Press the keys as shown:2. When the display below appears, press the keys shown:3. When the display below appears, press the keys shown to start the auto-calibration:Service (1)Parameter (2)Autocalib (3)Simulation (4)10 Errors (1)Production (2)Fuel Flow (3)Impulse (4) 4VAPOR CONTROLLERPulse assignmentCur: 050Change with F2 F2Press numberkeys to enterdesired pulserate, e.g., 136ENTER*** SERVICE ***SAL – pump (1)S&B – pump (2)GIL – pump (3)*** SERVICE ***Gas measuring (1)SYS–Identify (2)EC2000 (3)2
