Vega VEGABAR 82 Quick Setup Manual

Also see for VEGABAR 82: Product information Operating instructions Quick setup guide Operating instructions Operating instructions

Contents

135 Set up with the display and adjustment moduleVEGABAR 82 • Slave sensor for electronic differential pressure48051-EN-1904041 2Fig. 7: Installing the display and adjustment module in the double chamberhousing1 In the electronics compartment2 In the connection compartmentNote:If you intend to retrofit the instrument with a display and adjustmentmodule for continuous measured value indication, a higher lid with aninspection glass is required.5.2 Parameter adjustmentA parameter change with SIL qualified instruments must always becarried out as follows:• Unlock adjustment• Change parameters• Lock adjustment and verify modified parametersThis ensures that all modified parameters have been deliberatelychanged.Unlock adjustmentThe instrument is shipped in locked condition.To prevent unintentional or unauthorized adjustment, the instrumentis protected (locked) against all parameter changes while in normaloperating condition.For each parameter change you have to enter the PIN of the instru-ment. In delivery status, the PIN is "0000".Change parametersYou can find a description below the respective parameter.Operating sequence