Vega VEGACAL 65 Operating Instructions Manual

Also see for VEGACAL 65: Safety manual Operating instructions Operating instructions Operating instructions

Contents

327 Set up with PACTware and other adjustment programsVEGACAL 65 • Foundation Fieldbus30035-EN-1309177.2 Parameter adjustment with PACTwareFurther setup steps are described in the operating instructionsmanual "DTM Collection/PACTware" attached to each CD and whichcan also be downloaded from our homepage. A detailed descriptionis available in the online help of PACTware and the VEGA DTMs.Note:Keep in mind that for setup of VEGACAL 65, DTM-Collection in theactual version must be used.All currently available VEGA DTMs are included as a DTM Collectionon a CD. They can be purchased for a token fee from the responsibleVEGA agency. In addition, the actual PACTware version is also avail-able on this CD.In addition, this DTM Collection incl. the basic version of PACT-ware can be downloaded free of charge from the Internet. Move viawww.vega.com and "Downloads" to "Software".7.3 Parameter adjustment with AMS™ and PDMFor VEGA sensors, instrument descriptions for the adjustmentprograms AMS™ and PDM are available as DD or EDD. The instru-ment descriptions are already implemented in the current versions ofAMS™ and PDM.For older versions of AMS™ and PDM, a free-of-charge download isavailable via Internet. Move via www.vega.com and "Downloads" to"Software".7.4 Saving the parameter adjustment dataIt is recommended to document or save the parameter adjustmentdata. That way they are available for multiple use or service purposes.The VEGA DTM Collection and PACTware in the licensed, profession-al version provide suitable tools for systematic project documentationand storage.