389 Measured value transmission to a WEB-VV serverRS232/Ethernet connection • VEGAMET 391/624/625, VEGASCAN 693, PLICSRADIO C6230325-EN-1307019.5 Setup MoRoSAdjustment of the MoRoS is carried out with the help of any Webbrowser, e.g. the Internet Explorer. Connect your PC via Patchkabelwith one of the four Ethernet ports on the front side of the MoRoS. Inorder to establish a connection, the PC must be able to obtain an IPaddress from the MoRoS automatically (DHCP). Alternatively, a fixedIP address can be used if it lies in the same address range of theMoRoS (192.168.1. xxx). You can get further information also from theoperating instructions manual of the MoRoS.MoRoS with PSTN/ISDN modemStart your Web browser and enter the IP address of the MoRoS(192.168.1.1) in the field marked "Address" or "URL". Authenticateyourself with the user name "insys" and the password "moros".Fig. 24: MoRoS user authenticationCarry out the modem settings for remote parameterisation shown inthe following illustrations. Select from the list box the country code ofthe country in which the modem will be used.LoginModem settings