Vega VEGAPULS 61 Operating Instructions Manual

Also see for VEGAPULS 61: Operating instructions Quick setup guide Operating instructions Operating instructions Quick setup guide

Contents

Vega VEGAPULS 61 Operating Instructions Manual Manual pdf 11 page image

113 Product descriptionVEGAPULS 61 • Modbus and Levelmaster protocol41361-EN-160224• Storage and transport temperature see chapter "Supplement -Technical data - Ambient conditions"• Relative humidity 20 … 85 %3.4 Accessories and replacement partsThe display and adjustment module PLICSCOM is used for measuredvalue indication, adjustment and diagnosis. It can be inserted into thesensor and removed at any time.You can find further information in the operating instructions "Displayand adjustment module PLICSCOM" (Document-ID 27835).The interface adapter VEGACONNECT enables the connection ofcommunication-capable instruments to the USB interface of a PC. Forparameter adjustment of these instruments, the adjustment softwarePACTware with VEGA-DTM is required.You can find further information in the operating instructions "Interfaceadapter VEGACONNECT" (Document-ID 32628).The protective cover protects the sensor housing against soiling andintense heat from solar radiation.You will find additional information in the supplementary instructionsmanual "Protective cover" (Document-ID 34296).Screwed flanges are available in different versions according to thefollowing standards: DIN 2501, EN 1092-1, BS 10, ASME B 16.5,JIS B 2210-1984, GOST 12821-80.You can find additional information in the supplementary instructionsmanual "Flanges according to DIN-EN-ASME-JIS".Electronics module "VEGAPULS series 60" is a replacement part forradar sensors of VEGAPULS series 60. A different version is availablefor each type of signal output.You can find further information in the operating instructions "Elec-tronics module VEGAPULS series 60" (Document-ID 36801).The supplementary electronics is a replacement part for sensors withsignal output Modbus.You can find further information in the operating instructions "Supple-mentary electronics Modbus" (Document-ID 41864).The antenna impedance cone is a replacement part used for optimumtransmission of microwaves and for sealing against the process.You find further information in the operating instructions "Antennaimpedance cone VEGAPULS 62 and 68" (Document-ID 31381).Storage and transporttemperaturePLICSCOMVEGACONNECTProtective capFlangesElectronics moduleSupplementary electron-ics ModbusAntenna impedance cone