Vega VEGAPULS 61 Operating Instructions Manual

Also see for VEGAPULS 61: Operating instructions Quick setup guide Operating instructions Operating instructions Quick setup guide

Contents

Vega VEGAPULS 61 Operating Instructions Manual Manual pdf 10 page image

103 Product descriptionVEGAPULS 61 • Foundation Fieldbus41716-EN-160224The delivery must be checked for completeness and possible transitdamage immediately at receipt. Ascertained transit damage or con-cealed defects must be appropriately dealt with.Up to the time of installation, the packages must be left closed andstored according to the orientation and storage markings on theoutside.Unless otherwise indicated, the packages must be stored only underthe following conditions:• Not in the open• Dry and dust free• Not exposed to corrosive media• Protected against solar radiation• Avoiding mechanical shock and vibration• Storage and transport temperature see chapter "Supplement -Technical data - Ambient conditions"• Relative humidity 20 … 85 %3.4 Accessories and replacement partsThe display and adjustment module PLICSCOM is used for measuredvalue indication, adjustment and diagnosis. It can be inserted into thesensor and removed at any time.You can find further information in the operating instructions "Displayand adjustment module PLICSCOM" (Document-ID 27835).The interface adapter VEGACONNECT enables the connection ofcommunication-capable instruments to the USB interface of a PC. Forparameter adjustment of these instruments, the adjustment softwarePACTware with VEGA-DTM is required.You can find further information in the operating instructions "Interfaceadapter VEGACONNECT" (Document-ID 32628).The VEGADIS 81 is an external display and adjustment unit for VEGAplics® sensors.For sensors with double chamber housing the interface adapter"DISADAPT" is also required for VEGADIS 81.You can find further information in the operating instructions "VE-GADIS 81" (Document-ID 43814).The adapter "DISADAPT" is an accessory part for sensors with dou-ble chamber housings. It enables the connection of VEGADIS 81 tothe sensor housing via an M12 x 1 plug.You can find further information in the supplementary instructions"Adapter DISADAPT" (Document-ID 45250).PLICSMOBILE T61 is an external GSM/GPRS radio unit for transmis-sion of measured values and for remote parameter adjustment ofplics® sensors. Adjustment is carried out via PACTware/DTM and theintegrated USB connection.Transport inspectionStorageStorage and transporttemperaturePLICSCOMVEGACONNECTVEGADIS 81DISADAPTPLICSMOBILE T61