Vega VEGAPULS 61 Operating Instructions Manual

Also see for VEGAPULS 61: Operating instructions Quick setup guide Operating instructions Operating instructions Quick setup guide

Contents

Vega VEGAPULS 61 Operating Instructions Manual Manual pdf 37 page image

376 Set up with the display and adjustment moduleVEGAPULS 61 • Foundation Fieldbus41716-EN-160224– Move to the menu overview– Confirm selected menu– Edit parameter– Save value• [->] key:– Presentation, change measured value– Select list entry– Select menu items in the quick setup– Select editing position• [+] key:– Change value of the parameter• [ESC] key:– Interrupt input– Jump to next higher menuThe instrument is operated via the four keys of the display and adjust-ment module. The individual menu items are shown on the LC display.You can find the functions of the individual keys in the previousillustration.When the [+] and [->] keys are pressed quickly, the edited value, i.e.the cursor, moves by one position. When the keys are pressed longerthan 1 s, the cursor moves continuously.When the [OK] and [ESC] keys are pressed simultaneously for morethan 5 s, the display returns to the main menu. The menu language isthen switched over to "English".Approx. 60 minutes after the last pressing of a key, an automatic resetto measured value indication is triggered. Any values not confirmedwith [OK] will not be saved.6.3 Measured value indication - Selectionnational languageWith the [->] key you move between three different indication modes.In the first view, the selected measured value is displayed in largedigits.In the second view, the selected measured value and a correspond-ing bar graph presentation are displayed.In the third view, the selected measured value as well as a second se-lectable value, e.g. the temperature of the electronics, are displayed.During the initial setup of an instrument shipped Ex works, use the"OK" key to get to the menu "National language".Adjustment systemTime functionsMeasured value indica-tion