Vega VEGAPULS 61 Operating Instructions Manual

Also see for VEGAPULS 61: Operating instructions Quick setup guide Operating instructions Operating instructions Operating instructions

Contents

Vega VEGAPULS 61 Operating Instructions Manual Manual pdf 59 page image

596 Set up with the display and adjustment moduleVEGAPULS 61 • 4 … 20 mA/HART - two-wire36499-EN-170405In this menu item, the date of factory calibration of the sensor as wellas the date of the last change of sensor parameters are displayed viathe display and adjustment module or via the PC.In this menu item, the features of the sensor such as approval, pro-cess fitting, seal, measuring range, electronics, housing and othersare displayed.6.5 Saving the parameterisation dataWe recommended writing down the adjustment data, e.g. in this op-erating instructions manual, and archiving them afterwards. They arethus available for multiple use or service purposes.If the instrument is equipped with a display and adjustment module,the data in the sensor can be saved in the display and adjustmentmodule. The procedure is described in menu item "Copy devicesettings" in the menu "Additional settings". The data remain therepermanently even if the sensor power supply fails.The following data or settings for adjustment of the display and ad-justment module are saved:• All data of the menu "Setup" and "Display"• The items "Sensor-specific units, temperature unit and linearisa-tion" in the menu "Additional settings".• The values of the user-programmable linearisation curveThe function can also be used to transfer settings from one instru-ment to another instrument of the same type. If it is necessary toexchange a sensor, the display and adjustment module is insertedinto the replacement instrument and the data are likewise written intothe sensor via the menu item "Copy device settings".Info - Date of manufactureInstrument featuresBackup on paperBackup in the display andadjustment module