Vega VEGAPULS 61 Operating Instructions Manual

Also see for VEGAPULS 61: Operating instructions Quick setup guide Operating instructions Operating instructions Operating instructions

Contents

Vega VEGAPULS 61 Operating Instructions Manual Manual pdf 61 page image

617 Setup with PACTwareVEGAPULS 61 • 4 … 20 mA/HART - two-wire36499-EN-170405also usually equipped with a sufficient current limiting resistance. Insuch cases, the interface converter can be connected parallel to the4 … 20 mA cable (dashed line in the previous illustration).7.2 Parameter adjustmentFor parameter adjustment of the instrument via a Windows PC, theconfiguration software PACTware and a suitable instrument driver(DTM) according to FDT standard are required. The latest PACTwareversion as well as all available DTMs are compiled in a DTM Collec-tion. The DTMs can also be integrated into other frame applicationsaccording to FDT standard.Note:To ensure that all instrument functions are supported, you shouldalways use the latest DTM Collection. Furthermore, not all describedfunctions are included in older firmware versions. You can downloadthe latest instrument software from our homepage. A description ofthe update procedure is also available in the Internet.Further setup steps are described in the operating instructions manu-al "DTM Collection/PACTware" attached to each DTM Collection andwhich can also be downloaded from the Internet. Detailed descrip-tions are available in the online help of PACTware and the DTMs.Fig. 40: Example of a DTM viewAll device DTMs are available as a free-of-charge standard versionand as a full version that must be purchased. In the standard version,all functions for complete setup are already included. An assistant forsimple project configuration simplifies the adjustment considerably.Saving/printing the project as well as import/export functions are alsopart of the standard version.PrerequisitesStandard/Full version