346 Set up with the display and adjustment moduleVEGAPULS 64 • HART and accumulator pack56611-EN-180115With the "OK" key you move to the main menu.6.4 Parameter adjustment - Quick setupTo quickly and easily adapt the sensor to the application, selectthe menu item "Quick setup" in the start graphic on the display andadjustment module.Select the individual steps with the [->] key.After the last step, "Quick setup terminated successfully" is displayedbriefly.Information:The echo curve of setup is stored automatically during the quicksetup.The return to the measured value indication is carried out through the[->] or [ESC] keys or automatically after 3 sYou can find "Extended adjustment" in the next sub-chapter.6.5 Parameter adjustment - Extended adjustmentThe main menu is divided into five sections with the following func-tions:Setup: Settings, e.g., for measurement loop name, units, application,adjustment, signal outputDisplay: Settings, e.g., for language, measured value display, light-ingDiagnosis: Information, for example, on device status, peak value,simulation, echo curveAdditional adjustments: Date/Time, reset, copy function, scaling,current output, false signal suppression, linearization, HART mode,special parametersInfo: Instrument name, hardware and software version, calibrationdate, instrument featuresIn the main menu item "Setup", the individual submenu itemsshould be selected one after the other and provided with the correctparameters to ensure optimum adjustment of the measurement. Theprocedure is described in the following.Main menu