Vega VEGAPULS 64 Operating Instructions Manual

Also see for VEGAPULS 64: Operating instructions Quick setup guide Mounting instructions Operating instructions Quick setup guide

Contents

406 Set up with the display and adjustment moduleVEGAPULS 64 • HART and accumulator pack56611-EN-180115100%0%0,5 m(19.68")5 m(196.9")213Fig. 34: Parameterisation example, Min./max. adjustment1 Min. level = max. measuring distance2 Max. level = min. measuring distance3 Reference planeIf these values are not known, an adjustment with the distances of e.g.10 % and 90 % is possible. Starting point for these distance specifica-tions is always the sealing surface of the thread or flange. You can findspecifications on the reference plane in chapter "Technical data". Theactual level is calculated on the basis of these settings.The actual product level during this adjustment is not important,because the min./max. adjustment is always carried out withoutchanging the product level. These settings can be made ahead oftime without the instrument having to be installed.Proceed as follows:1. Select with [->] the menu item Max. adjustment and confirm with[OK].2. Prepare the percentage value for editing with [OK] and set thecursor to the requested position with [->].3. Set the requested percentage value with [+] and save with [OK].The cursor jumps now to the distance value.Setup - Max. adjustment