Vega VEGAPULS 65 Operating Instructions Manual

Also see for VEGAPULS 65: Quick setup guide Operating instructions Safety manual Quick setup guide Operating instructions

Contents

Vega VEGAPULS 65 Operating Instructions Manual Manual pdf 46 page image

467 Setting up sensor and Modbus interface with PACTwareVEGAPULS 65 • Modbus and Levelmaster protocol41365-EN-1602241Fig. 23: Connecting the PC via USB to the Modbus electronics1 USB cable to the PCConnection of the PC to the RS 485 cable is carried out via a stand-ard interface adapter RS 485/USB.Scope of the parameter adjustment:• Sensor electronics• Modbus electronicsInformation:For parameter adjustment, it is absolutely necessary to disconnectfrom the RTU.RS485USB12345Fig. 24: Connection of the PC via the interface adapter to the RS 485 cable1 Interface adapter RS 485/USB2 USB cable to the PC3 RS 485 cable4 Sensor5 Voltage supply7.2 Parameter adjustmentFor parameter adjustment of the instrument via a Windows PC, theconfiguration software PACTware and a suitable instrument driver(DTM) according to FDT standard are required. The latest PACTwareversion as well as all available DTMs are compiled in a DTM Collec-To the RS 485 cablePrerequisites