Vega VEGAPULS 66 Operating Instructions Manual

Also see for VEGAPULS 63: Safety manual Quick setup guide Operating instructions Operating instructions Operating instructions

Vega VEGAPULS 66 Operating Instructions Manual Manual pdf 10 page image

3.3 Packaging, transport and storageYour instrument was protected by packaging during transport. Itscapacity to handle normal loads during transport is assured by a testaccording to DIN EN 24180.The packaging of standard instruments consists of environment-friendly, recyclable cardboard. For special versions, PE foam or PE foilis also used. Dispose of the packaging material via specialisedrecycling companies.Transport must be carried out under consideration of the notes on thetransport packaging. Nonobservance of these instructions can causedamage to the device.The delivery must be checked for completeness and possible transitdamage immediately at receipt. Ascertained transit damage orconcealed defects must be appropriately dealt with.Up to the time of installation, the packages must be left closed andstored according to the orientation and storage markings on theoutside.Unless otherwise indicated, the packages must be stored only underthe following conditions:l Not in the openl Dry and dust freel Not exposed to corrosive medial Protected against solar radiationl Avoiding mechanical shock and vibrationl Storage and transport temperature see chapter "Supplement -Technical data - Ambient conditions"l Relative humidity 20 … 85 %3.4 Accessories and replacement partsThe indicating and adjustment module PLICSCOM is used formeasured value indication, adjustment and diagnosis. It can beinserted into the sensor and removed at any time.You can find further information in the operating instructions "Indicatingand adjustment module PLICSCOM" (Document-ID 27835).The interface adapter VEGACONNECT enables the connection ofcommunication-capable instruments to the USB interface of a PC. Forparameter adjustment of these instruments, an adjustment softwaresuch as PACTware with VEGA-DTM is required.You can find further information in the operating instructions "Interfaceadapter VEGACONNECT" (Document-ID 32628).PackagingTransportTransport inspectionStorageStorage and transporttemperatureIndicating and adjust-ment moduleInterface adapter10 VEGAPULS 66 • Profibus3 Product description36521-EN-120301