Vega vegapuls 61 Quick Setup Manual
Also see for VEGAPULS 61: Operating instructionsQuick setup guideOperating instructionsOperating instructionsOperating instructions
                        | |
Contents
| 
135 Set up with the display and adjustment moduleVEGAPULS 61 • Profibus PA47106-EN-1611045 Set up with the display and adjustmentmodule5.1 Insert display and adjustment moduleThe display and adjustment module can be inserted into the sensorand removed again at any time. You can choose any one of four differ-ent positions - each displaced by 90°. It is not necessary to interruptthe power supply.Proceed as follows:1. Unscrew the housing lid2. Place the display and adjustment module on the electronics in thedesired position and turn it to the right until it snaps in.3. Screw housing lid with inspection window tightly back onDisassembly is carried out in reverse order.The display and adjustment module is powered by the sensor, an ad-ditional connection is not necessary.Fig. 10: Installing the display and adjustment module in the electronics compart-ment of the single chamber housing |
Related manuals for Vega VEGAPULS 61
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine