WAGNER GM 4100AC Operating Manual

12GM 4100ACOPERATING MANUALEDITION 12/2008 PART NO. DOC3948214.1 FIELDS OF APPLICATION, USING IN ACCORDANCE WITH THE INSTRUCTIONSThe gun is suitable for atomising liquid materials, particularly coating materials, using the AirCoat process.4.1.1 PROCESSING MATERIALSTop-coat paints, primer paints, corrosion protection solvents, textured paints, lyes, staining solvents, clear paints,parting solvents, etc. on a solvent or water basis. If you want to spray other working materials than the afore-mentioned, turn please to a Wagner agency.Note: Please contact your local WAGNER dealer and the paint manufacturer if you encounter applicationproblems.4 DESCRIPTIONSIHI_0019_GBWARNINGHot coating substances!Burns Wear antistatic protective gloves. When operating the unit with a coating material with a temper-ature greater than 43°C; 109.4°F: Identify the unit with a warningsticker "Warning - hot surface".4.2.2 VARIANT FOR APPLICATION RANGE UP TO 25 MPA, 250 BAR, 3625 PSIQty Part-No. Description1 394012 GM 4100AC 25 MPa ; NPSM1/4“ Paint connection4.2.1 VARIANT FOR APPLICATION RANGE UP TO 16 MPA; 160 BAR; 2320 PSIQty Part-No. Description1 394002 GM 4100AC 16 MPa; NPSM1/4“ Paint connection4.2 EXTENT OF DELIVERYThese AirCoat gun is available in two different variants. The nozzle size depends on the paint and on the ap-plication, Therefore the air cap and the nozzle are not included in the scope of supply. For a gun accessorieslook in chapter 9.394002 394012 AirCoat hand gun GM 4100ACQty Qty Part-No. Description1 1 394891 CE-conformity1 1 394820 Operating manual German1 1 see chap. 1 Operating manual for the other languageFor special versions the delivery note applies.4.2.3 STANDARD EQUIPMENTSThe standard equipment includes: