6GM 4100ACOPERATING MANUALEDITION 12/2008 PART NO. DOC3948212 GENERAL SAFETY INSTRUCTIONS2.1 SAFETY INSTRUCTIONS FOR THE OPERATOR2.1.1 ELECTRICAL EQUIPMENT2.1.2 PERSONNEL QUALIFICATIONS2.1.3 A SAFE WORK ENVIRONMENT2.2 SAFETY INSTRUCTIONS FOR STAFF +EEP THESE OPERATING INSTRUCTIONS TO HAND NEAR THE UNIT AT ALL TIMES !LWAYS FOLLOW LOCAL REGULATIONS CONCERNING OCCUPATIONAL SAFETY AND ACCIDENT PREVENTION%LECTRICAL PLANT AND UNIT 4O BE PROVIDED IN ACCORDANCE WITH THE LOCAL SAFETY REQUIREMENTS WITH REGARD TO THE OPERATING MODE AND AMBIENT INmUENCES -AY ONLY BE MAINTAINED BY SKILLED ELECTRICIANS OR UNDER THEIR SUPERVISION -UST BE OPERATED IN ACCORDANCE WITH THE SAFETY REGULATIONS AND ELECTROTECHNICAL REGULATIONS -UST BE REPAIRED IMMEDIATELY IN THE EVENT OF PROBLEMS -UST BE PUT OUT OF OPERATION IF THEY POSE A HAZARD -UST BE DE ENERGIZED BEFORE WORK IS COMMENCED ON ACTIVE PARTS )NFORM STAFF ABOUT PLANNED WORK OBSERVE ELECTRICAL SAFETY REGULATIONS %NSURE THAT THE UNIT IS OPERATED AND REPAIRED ONLY BY TRAINED PERSONS %NSURE THAT THE mOOR OF THE WORKING AREA IS ANTI STATIC IN ACCORDANCE WITH %. 0ART e MEASUREMENT IN ACCORDANCE WITH $). %NSURE THAT ALL PERSONS WITHIN THE WORKING AREA WEAR ANTI STATIC SHOES EG SHOES WITH LEATHER SOLES %NSURE THAT DURING SPRAYING PERSONS WEAR ANTI STATIC GLOVES SO THAT THEY ARE EARTHED VIA THE HANDLE OF THE SPRAY GUN #USTOMER TO PROVIDE PAINT MIST EXTRACTION SYSTEMS CONFORMING TO LOCAL REGULATIONS %NSURE THAT THE FOLLOWING COMPONENTS OF A SAFE WORKING ENVIRONMENT ARE AVAILABLE