WAGNER GM 4600AC Operating Instructions Manual

Also see for GM 4600AC: Translation of the original operating manual

12GM 4600ACOPERATING MANUALEDITION 02/2008 Part No. DOC3948614.1 FIELDS OF APPLICATION, USING IN ACCORDANCE WITH THE INSTRUCTIONSThe gun is suitable for atomising liquid materials, particularly coating materials, using theAirCoat process.4.1.1 PROCESSIBLE MATERIALSTop-coat paints, primer paints, corrosion protection solvents, textured paints, lyes, stainingsolvents, clear paints, parting solvents, etc. on a solvent or water basis.Note: In the event of application problems consult your Wagner branch and/ or thepaint manufacturer.4 DESCRIPTIONSIHI_0019_GBWARNINGHot coating substances!Burns Wear antistatic protective gloves. When operating the unit with a coating material with a temper-ature greater than 43°C; 109.4°F: Identify the unit with a warningsticker "Warning - hot surface".4.2.2 VARIANT FOR APPLICATION RANGE UP TO 25 MPA, 250 BAR, 3625 PSIQty Part No. Description1 0394014 GM 4600AC 25 MPa ; NPSM1/4“ Paint connection4.2.1 VARIANT FOR APPLICATION RANGE UP TO 16 MPA; 160 BAR; 2320 PSIQty Part No. Description1 0394004 GM 4600AC 16 MPa; NPSM1/4“ Paint connection4.2 SCOPE OF DELIVERYThese AirCoat gun is available in two different variants. The nozzle size depends on thepaint and on the application. Therefore the air cap and the nozzle are not included in thescope of supply. For a gun accessories look in chapter 9.0394004 0394014 AirCoat hand gun GM 4600ACQty Qty Part No. Description1 1 0394891 CE-conformity1 1 394860 Operating manual German1 1 see chap. 1 Operating manual for the other languageFor special versions the delivery note applies.4.2.3 STANDARD EQUIPMENTSThe standard equipment includes: