WAGNER GM 4600AC Operating Instructions Manual

Also see for GM 4600AC: Translation of the original operating manual

17GM 4600ACOPERATING MANUALEDITION 02/2008 Part No. DOC3948615.1.2 VENTILATION OF THE SPRAY BOOTH5.1.3 AIR SUPPLYThe use of an air filter with the air regulator (D) ensures that only dry, clean atomising airgets into the spray gun. Dirt and moisture in the atomising air reduce the spraying qualityand the appearance of the finished piece.5.1.4 FLUID (PAINT) HOSESWARNINGToxic and/or flammable vapor mixtures!Risk of poisoning and burns Operate the unit in a spraying booth approved for the workingmaterials. -or- Operate the unit on an appropriate spraying wall with the venti-lation (extraction) switched on. Observe national and local regulations for the outgoing airspeed.SIHI_0028_GB#!54)/.)MPURITIESINTHESPRAYINGSYSTEM3PRAYGUNBLOCKAGE MATERIALSHARDENINTHESPRAYINGSYSTEM &LUSHTHESPRAYGUNANDPAINTSUPPLYWITHASUITABLECLEANINGAGENT3)()??'"SIHI_0029_GBDANGERBursting hose, bursting threaded joints!Danger to life from injection of materialEnsure that the hose material is chemically resistant.Ensure that the spray gun, threaded joints and material hosebetween the unit and the spray gun is suitable for the pressuregenerated in the unit.Ensure that the following information can be seen on the high-pressure hose: - Manufacturer - Permissible operating pressure - Date of manufacture.