8GM 4600ACOPERATING MANUALEDITION 02/2008 Part No. DOC3948612.2.4 CLEANING2.2.5 HANDLING HAZARDOUS LIQUIDS, VARNISHES AND PAINTS2.2.6 TOUCHING HOT SURFACES2.3 CORRECT USE $E ENERGIZE THE UNIT ELECTRICALLY $ISCONNECT THE PNEUMATIC SUPPLY LINE 2ELIEVE THE PRESSURE FROM THE UNIT %NSURE THAT THE mASH POINT OF THE CLEANING AGENT IS AT LEAST + ABOVE THE AMBIENT TEMPERATURE 4O CLEAN USE ONLY SOLVENT FREE CLOTHS AND BRUSHES .EVER USE HARD OBJECTS OR SPRAY ON CLEANING AGENTS WITH A GUN!N EXPLOSIVE GASAIR MIXTURE FORMS IN CLOSED CONTAINERS 7HEN CLEANING UNITS WITH SOLVENTS NEVER SPRAY INTO A CLOSED CONTAINER %ARTH THE CONTAINER 7HEN PREPARING OR WORKING WITH PAINT AND WHEN CLEANING THE UNIT FOLLOW THE WORKING INSTRUCTIONS OF THE MANUFACTURER OF THE PAINTS SOLVENTS AND CLEANING AGENTS BEING USED 4AKE THE SPECIlED PROTECTIVE MEASURES IN PARTICULAR WEAR SAFETY GOGGLES PROTECTIVE CLOTHING AND GLOVES AS WELL AS HAND PROTECTION CREAM IF NECESSARY 5SE A MASK OR BREATHING APPARATUS IF NECESSARY &OR