53PROTEC 2KOPERATING MANUALVERSION 02/2016 ORDER NUMBER DOC23528247.4 SPRAYING MODEB_05429123B_054301 23123Prepare flushing pump (option) andflushing agent.Fill product A+B. Close cover. Fix return lines.PreparingPrepare the object to be sprayed and the spray gun1. Prepare the object to be sprayed and the entire work environment for spraying.2. Secure the spray gun and place the nozzle in the gun.Visual check3. Visual check: personal safety equipment, grounding and all devices ready to use.Wheel brake applied. Blue handle (3) at bottom. Red handle (12) at top. All circulationand return hoses are secured and lead into the product tanks A or B.Prepare flushing pump (if present)A. Fill flushing pump with flushing agent in accordance with flushing pump'soperating manual.B. Place the suction hose of the flushing pump into a grounded tank with flushing agent.C. Adjust suitable flushing pressure at the air pressure regulator of the flushingpump (31).D. Open the air ball balve of the flushing pump (32).Prepare heater (if present)E. Insert the power plug of the heaters.F. Set the desired temperature at the heaters.(The position "3.5" results a product temperature of 50 °C; 122 °F at the output ofthe heater.)Prepare working materialIf the device is being filled with a new paint or new hardener, paint change flushingmust be undertaken first in accordance with Chapter 7.7.4. If the device is not yet filled up to the circulation valves with working material, fill inaccordance with Chapter 8.2.5.5. Fill the corresponding product tanks with working materials A and B.6. Close cover.7. Fix return lines.7.4.1 PREPARING1 2
