WAGNER W 350 Operating Instructions Manual

9W 350 AUSSpare Parts List (Fig. 9)10 Container seal 2323 03911 Suction tube 2362 87612 Container with cover 0413 90913,14,15 Ventilating hose, valve cover, diaphragm 2304 02716 Stir stick 2304 41917 Lubricating grease (no fig.) 2315 53915. AccessoriesThe CLICK&PAINT SYSTEM with additional spray attachments and accessories offersthe right tool for each work.Further information about the WAGNER range of products for renovating isavailable under www.wagner-group.com16. Correction of MalfunctionsProblem Cause RemedyNo coatingmaterialemerges fromthe nozzle• Nozzle clogged• Feed tube clogged• Material volume too small• Feed tube loose• No pressure build-up in container➞ Clean➞ Clean➞ Increase the quantity ofmaterial➞ Insert➞ Tighten containerCoatingmaterial dripsfrom the nozzle• Nozzle loose• Nozzle worn• Nozzle seal is missing or worn• Coating material assembly at aircap, nozzle or needle➞ Tighten➞ Change➞ Insert an intact nozzle seal➞ CleanAtomisation toocoarse• Viscosity of coating material toohigh• Material volume too large• Nozzle contaminated• Air filter heavily soiled• Too little pressure build-up incontainer➞ Thin➞ Reduce the material➞ volume➞ Clean➞ Change➞ Tighten containerSpray jetpulsates• Coating material in containerrunning out• Air filter heavily soiled• Nozzle seal is missing or worn➞ Refill➞ Change➞ Insert an intact nozzle seal