WAGNER W 350 Operating Instructions Manual

3W 350 AUSf) Wear suitable clothing. Do not wear wide clothing or jewellery. Keep your hair,clothes and gloves away from moving parts. Loose clothing, jewellery or long haircan be caught in moving parts.g) Do not lull yourself into a false sense of security and do not think yourself abovethe safety rules for electric tools, even if you are familiar with the electric toolfollowing extensive practical experience. Careless use can lead to serious injuriesin fractions of a second.4. Usage and treatment of the electric toola) Do not overload the tool. Use the power tool designed for the work that youare doing. You work better and safer in the specified performance range if you use thesuitable power tool.b) Do not use power tools whose switch is defective. A power tool that cannot beswitched on or off is dangerous and has to be repaired.c) Remove the plug from the socket before carrying out tool settings, changingaccessories or putting the tool away. This precautionary measure preventsunintentional starting of the tool.d) Store unused power tools so that they are inaccessible to children. Do not letpersons use the tool who are not familiar with it or who have not read theseinstructions. Power tools are dangerous when they are used by inexperienced persons.e) Take proper care of your tools. Check whether the moving parts functiontrouble-free and do not jam, whether parts are broken or damaged so thatthe tool function is impaired. Have damaged parts repaired before using thetool. Many accidents have their origin in power tools that have been maintained badly.f) Use the power tool, accessories, insert tools, etc. in accordance with theseinstructions and in a fashion specified for this special tool type. Take the workingconditions and the activity to be carried out into consideration. The use of powertools for purposes other than the intended ones can lead to dangerous situations.g) Keep the handles and grip surfaces dry, clean and free of oil and grease. Slipperyhandles and grip surfaces hamper safe operation and control of the electric tool inunforeseen situations.5. Servicea) Have your tool repaired only by qualified specialist personnel and only withoriginal spare parts. This ensures that the tool safety is maintained.b) If the supply cord is damaged, it must be replaced by the manufacturer or it’sservice agent or a similarly qualified person in order to avoid a safety hazard.