WAGO 750-404 Manual

Also see for I/O-SYSTEM 750: Manual Manual Technical description User's installation and configuration Manual

WAGO 750-404 Manual Manual pdf 7 page image

Important Notes • 7Legal BasesWAGO-I/O-SYSTEM 750I/O Modules1.1.5 Standards and Guidelines for Operating the 750 SeriesPlease adhere to the standards and guidelines required for the use of yoursystem: The data and power lines shall be connected and installed in compliancewith the standards required to avoid failures on your system and tosubstantially minimize any imminently hazardous situations resulting inpersonal injury. For assembly, start-up, maintenance and troubleshooting, adhere to thespecific accident prevention provisions which apply to your system (e.g.BGV A 3, "Electrical Installations and Equipment"). Emergency stop functions and equipment shall not be made ineffective.See relevant standards (e.g. DIN EN 418). The equipment of your system shall be conform to EMC guidelines so thatany electromagnetic interferences will be eliminated. Operating 750 Series components in home applications without furthermeasures is permitted only if they meet the emission limits (emissions ofinterference) in compliance with EN 61000-6-3. You will find the detailedinformation in section "WAGO-I/O-SYSTEM 750"  "SystemDescription"  "Technical Data". Please observe the safety precautions against electrostatic discharge inaccordance with DIN EN 61340-5-1/-3. When handling the modules,please ensure that environmental factors (persons, working place andpackaging) are well grounded. The valid standards and guidelines applicable for the installation of switchcabinets shall be adhered to.