WAGO 750-430/040-000 Manual

36 Connect Devices WAGO I/O-SYSTEM 750 XTR750-430/040-000 8DI 24 VDC 3ms XTRManualVersion 1.1.0Pos : 56 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1Pos: 57 /Alle Serien ( Allgemeine Module)/Überschr iften/Ebene 1/Geräte anschließen - Überschrift 1 @ 3\mod_1234172889468_21.docx @ 27460 @ 1 @ 16 Connect DevicesPos : 58 /Serie 750 ( WAGO-I/O-SYST EM)/Ans chli eßen/Leiter an C AGE C LAM P ans chli eßen ( allgemei n) - Übersc hrift 2 und Text @ 3\mod_1225448660171_21.doc x @ 24928 @ 2 @ 16.1 Connecting a Conductor to the CAGE CLAMP ®The WAGO CAGE CLAMP® connection is appropriate for solid, stranded andfinely stranded conductors.Only connect one conductor to each CAGE CLAMP® !Only one conductor may be connected to each CAGE CLAMP ® .Do not connect more than one conductor at one single connection!If more than one conductor must be routed to one connection, these must beconnected in an up-circuit wiring assembly, for example using WAGO feed-through terminals.1. For opening the CAGE CLAMP® insert the actuating tool into the openingabove the connection.2. Insert the conductor into the corresponding connection opening.3. For closing the CAGE CLAMP® simply remove the tool. The conductor isnow clamped firmly in place.Figure 10: Connecting a Conductor to a CAGE CLAMP®Pos : 59 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1