164 Appendix WAGO-I/O-SYSTEM 750750-644 Bluetooth® RF-TransceiverManualVersion 2.0.0, valid from FW/HW Version 03/03Return valuesParameters Value DescriptionMBX_CMD_RESULT MBX_CMD_DENIED_NOT_IMPLEMENTEDThe parameter is not implemented(router)MBX_CMD_INVALID_ARG Invalid value forMBX_DEVICE_ROLE12.3.5.18 Restoring Factory SettingsSetFactorySettings, 0x57This command is used to overwrite the local configuration saved in the flash withthe factory settings. The Bluetooth ® subsystem is then rebooted.ConditionsMailbox size Mode Device role Saveconfig.Reboot6 12 18 Config. Real-time Ad-hoc Master Slave● ● ● ● ● ● ● ● ● ●RequestByte 2 7 2 6 2 5 2 4 2 3 2 2 2 1 2 00 MBX_SETFACTORYSETTINGS1 T -ResponseByte 2 7 2 6 2 5 2 4 2 3 2 2 2 1 2 00 MBX_SETFACTORYSETTINGS1 T MBX_RESULTReturn valueParameters Value Description- - -12.3.5.19 Reading the Maximum Transmission PowerGetMaxTXPower, 0x58This command reads the limit of the maximum transmission power. The“SetMaxTXPower” command sets the limit and defines to what value the 750-644I/O module may increase its maximum transmission power. The “maxTXpower”parameter is always equal to or greater than the “defaultTXpower” parameter(value between 0 and 20 dBm).ConditionsMailbox size Mode Device role Saveconfig.Reboot6 12 18 Config. Real-time Ad-hoc Master Slave● ● ● ● ● ● ● ● ● -RequestByte 2 7 2 6 2 5 2 4 2 3 2 2 2 1 2 00 MBX_GETMAXTXPOWER1 T -
