WAGO I/O-SYSTEM 750 Manual

Also see for I/O-SYSTEM 750: Manual Manual Technical description User's installation and configuration Manual

Contents

WAGO I/O-SYSTEM 750 Manual Manual pdf 45 page image

45 Commissioning WAGO-I/O-SYSTEM 750750-597 8AO 0-10V/±10V DCManualVersion 1.0.07.1.1.3.1.2 “Save” Menu ItemThe calibration settings are not saved!Please note that the calibration settings cannot be saved in the parameter file.Note the memory range!Please note that only the settings are saved in the parameter file that you havealready transferred to the I/O module by clicking the [Write] or [Write all]buttons in the main menu.In this menu item you can save the changes you have made in a parameter file.Proceed as follows:1. Click the [Save] button in the main menu.A Windows standard dialog window for selecting the target directory thenopens.2. Select the target directory in which you want to save the new parameter file.3. Click [Save] in the Windows standard dialog window.The parameter file is saved to the target directory selected.7.1.1.3.2 “Start” TabClick the Start tab in the horizontal tab menu to display the following selectionoptions in the main menu.Figure 18: Contents of the Horizontal Tab StartIf you select the Channel settings menu item in the vertical tab menu, you canalso choose the required I/O module channel in the main menu.Figure 19: Start > Main Menu > Channel Selection List