Wacker Neuson BTS 930 Operator's Manual
                                                              | |
Contents
| 
T00823GB 26RefuellingIMPORTANT: FOLLOW THE SAFETYPRECAUTIONS BY ALL MEANS!Be careful and cautious when handling fuels.The engine must be turned off and cooled down!Carefully clean the area around the fuel-tank filler neckto keep dirt from getting in the tank.Place the unit on its side on an aven surface.Unscrew the tank cap and fill tank with fuel mixture.Take care to avoid spilling.Tightly screw on the plug.Clean screw plug and tank after refuelling. Neverstart or operate the Power Cut in the same place asit was fuelled!Starting the engineThis model features a semiautomatic starting valve (1)(Happy-Start) to make starting easier. Pushing thisvalve in reduces the amount of compression effortneeded, so that it is easier to bring the engine up tostarting speed when pulling the starter cable.The high pressure increase in the combustionchamber that results from the first ignitions willautomatically close the starting valve (button popsback out).CAUTION:Observe the SAFETY INSTRUCTIONS!Start the Power Cut only after complete assemblyand inspection!Move at least 3 m away from the place where youfuelled the Power Cut.Make sure you have a good footing, and place thePower Cut on the ground in such a way that thecutting disc is not touching anything.Fuel mixture3839necessaryif3 meters40 |
Related manuals for Wacker Neuson BTS 1030
manualsdatabase
Your AI-powered manual search engine