Wacker Neuson G 2.5A Operator's Manual

Also see for G2.5A: Repair manual Operator's manual

Contents

Wacker Neuson G 2.5A Operator's Manual Manual pdf 18 page image

1A-141A OPERATION G2.5A1.27 TransportingWhen transporting the generator:1. Turn the engine fuel valve to the off position.2. Position the generator level to prevent fuel fromspilling.3. Secure the generator by tying it down with suitablerope.Let engine cool before transporting generator orstoring indoors, to avoid burns or fire hazards.WARNING!1.26 Setting Engine SpeedGenerators require a fixed engine speed to maintain thecorrect voltage. Engine speed is controlled by a governorwhich automatically adjusts to varying loads on theengine to maintain a constant speed of 3600–3700 rpm.To set governor speed:Turn governor speed adjusting screw (j) in or out toobtain a no-load speed of 3700 rpm.CAUTION: Setting the governor speed too high or toolow may damage tools and other appliances attached tothe generator.j1001SD151.25 Carburetor AdjustmentThe pilot screw (a) is fitted with a limiter cap to preventexcessive enrichment of the air-fuel mixture in order tocomply with emission regulations. The mixture is set atthe factory and no adjustment should be necessary. Donot attempt to remove the limiter cap. The limiter capcannot be removed without breaking the pilot screw.a1015SD05