Wacker Neuson GP 2600 Operator's Manual

Safety Information GP 2600wc_si000196gb.fm 102.4 Service SafetyPoorly maintained equipment can become a safety hazard! In orderfor the equipment to operate safely and properly over a long period oftime, periodic maintenance and occasional repairs are necessary. Ifthe generator is experiencing problems or is being serviced, attach a“DO NOT START” sign to the control panel to notify other people of itscondition.2.4.1 DO NOT use gasoline or other types of fuels or flammable solvents toclean parts, especially in enclosed areas. Fumes from fuels andsolvents can become explosive.2.4.2 DO NOT attempt to clean or service the machine while it is running.2.4.3 DO NOT modify the machine without the express written approval ofthe manufacturer.2.4.4 DO NOT allow water to accumulate around the base of the machine.If water is present, move the machine and allow the machine to drybefore servicing.2.4.5 DO NOT service the machine if your clothing or skin is wet.2.4.6 DO NOT allow untrained personnel to service this equipment. Onlytrained electrical technicians should be allowed to service the electricalcomponents of this equipment.2.4.7 ALWAYS keep the machine clean and labels legible. Replace allmissing and hard-to-read labels. Labels provide important operatinginstructions and warn of dangers and hazards.2.4.8 ALWAYS replace the safety devices and guards after repairs andmaintenance.2.4.9 ALWAYS let the engine cool before transporting or servicing it.2.4.10 ALWAYS keep hands, feet, and loose clothing away from the movingparts on the generator and engine.2.4.11 ALWAYS turn the engine off before servicing the machine. If theengine has electric start, disconnect the negative terminal on thebattery before servicing the machine.2.4.12 ALWAYS keep the fuel lines in good condition and properly connected.Leaking fuel and fumes are extremely explosive.WARNING