Operation RD 1642 wc_tx001075gb.fm3.13 Machine StabilitySurface conditionsPay attention to changing surface conditions while operating themachine. Adjust speed and travel direction as necessary to maintainsafe operation.• Machine stability and traction may be severely reduced whenoperating on uneven or rough terrain, rocky soils, or wet orloosely packed surface material.• The machine may suddenly tip, sink, or fall when moved onto sur-faces that have been newly filled with earth.Steering angleAn articulated roller is more likely to tip when moving off an elevatedsurface if the machine is turned away from the edge.• As shown in the illustration on the right, always turn the machinetoward the edge when moving off an elevated surface.Travel speedA fast moving machine is more likely to tip or fall over while makingturns or changing direction.• Reduce travel speed before turning the machine.Drum overhangThe machine can tip suddenly if more than half of the drum widthextends beyond the edge of the elevated surface.WARNINGCrushing hazards. Certain job site conditions or operating practices may adverselyaffect machine stability.f Follow the instructions below to reduce the risk of tipping or falling incidents.wc_gr007042
