RD 16 Operationwc_tx001075gb.fm 453.16 Position of the OperatorSafe and efficient use of this machine is the operator’s responsibility.Full control of the machine is not possible unless the operatormaintains the proper working position at all times.While operating this machine, the operator must:• be seated in the operator’s seat facing forward• wear the seat belt, properly adjusted and latched• have both feet on the control deck• have one hand on the steering wheel at all times• have the other hand free to operate the controls as needed3.17 Preparing the Machine for First UsePreparing for first useTo prepare your machine for first use:3.17.1 Make sure all loose packaging materials have been removed from themachine.3.17.2 Check the machine and its components for damage. If there is visibledamage, do not operate the machine! Contact your Wacker Neusondealer immediately for assistance.3.17.3 Take inventory of all items included with the machine and verify thatall loose components and fasteners are accounted for.3.17.4 Attach component parts not already attached.3.17.5 Add fluids as needed and applicable, including fuel, engine oil, andbattery acid.3.17.6 Move the machine to its operating location.
