Wacom CINTIQ 17SX Installation Manual And User's Manual

Wacom CINTIQ 17SX Installation Manual And User's Manual Manual pdf 3 page image

INTRODUCTION AND OVERVIEWPage 1INTRODUCTION AND OVERVIEWThe Wacom® DTU-710 Interactive Pen Display combines an LCD monitor with a Wacom pen tablet.This gives you a direct point-and-draw-on-screen interface that can be used with a Personal Computer(PC) or Macintosh® computer.The basic components of the DTU-710 include a Wacom pen tablet internally mounted behind a 17.0"diagonal TFT color LCD monitor, and a cordless, battery-free Wacom pen.This combined manual for Windows and Macintosh users describes how to install the DTU-710hardware and software. It also describes how to use the DTU-710 and pen.Please follow allinstructions carefully. The information is common to both platforms and Windows screen capturesare shown, unless otherwise noted.Note that the computer treats the DTU-710 as two separate pieces of hardware (the LCD monitorand the pen tablet). Therefore, the installation process is completed in two stages:• First install the LCD monitor portion of the DTU-710.• Then install the DTU-710’s pen tablet functionality.Both stages require hardware and software installations and adjustments.Please follow allinstructions carefully.The following kinds of information are not included with this product: information about your specificcomputer hardware or operating system, or information about your application software. Your bestsource for this information is the set of manuals and disks that came with your hardware, operatingsystem, or application.Refer toUnpacking the DTU-710 on page 5 when removing the DTU-710 from the box.For information on using the Tablet control panel for customizing your pen display tablet and pensettings, seeCustomizing on page 17.To use the pressure-sensitivity of the pen with your favorite drawing application, refer to instructions inthat application’s manuals.