Wacom CINTIQ 17SX Installation Manual And User's Manual

Wacom CINTIQ 17SX Installation Manual And User's Manual Manual pdf 42 page image

APPENDICESPage 40USING AN ALTERNATE MOUNT OR STANDIf you will be using the DTU-710 in aninstallation that requires the use of analternate mounting platform, you canremove the adjustable stand from the unitand mount the pen display onto a VESAconforming mount arm or stand.A VESA mounting platform will requiremount screws that are 4 mm wide with a0.7 mm pitch (M4 Regular), and amaximum screw clearance depth of 15 mm.Exceeding the clearance depth of 15 mmwill damage the DTU-710 internalcomponents.To remove the adjustable stand and attachthe DTU-710 to a different mountingplatform:1. Turn off your computer and power offthe DTU-710. Then disconnect allcables from the unit.2. Protect the display screen surface byspreading a soft cloth onto a flat tableand placing the DTU-710 face down onthe cloth.3. Remove the four screws and lift theadjustable stand assembly away fromthe body of the unit.4. Using the appropriate screws for yourmounting platform, firmly attach theDTU-710 to the alternate mountingplatform.5. Refer to theInstallation instructions,beginning on page 9, and reattach thecabling.CAUTION When attaching the DTU-710 onto analternate mounting platform, be sure tofollow all instructions in thedocumentation supplied by the platformmanufacturer. If improperly installed,the unit could fall, resulting in damageto the unit or physical injury.